Difference between revisions of "FATCA Manual"

From E-fileWiki
Jump to navigation Jump to search
Line 161: Line 161:
Once the key has been imported, the access to the keystore is memorized by the application and does not have to be reconfigured in the future.
Once the key has been imported, the access to the keystore is memorized by the application and does not have to be reconfigured in the future.


In order to be more user friendly and to speed up the sending process, the encryption module will then run as a back ground process on your desktop. If you need to end the process, right click on the icon in the
In order to be more user friendly and to speed up the sending process, the encryption module will then run as a back ground process on your desktop. If you need to end the process, right click on the icon in the taskbar and select “Close encryption module” :
taskbar and select “Close encryption module” :


[[File:EncryptionTaskbar.png |border]]
[[File:EncryptionTaskbar.png |border]]
Line 170: Line 169:
Result: as the installation and configuration of the encryption module are done, the General Tab of the Encryption Module will open directly.  
Result: as the installation and configuration of the encryption module are done, the General Tab of the Encryption Module will open directly.  


[[File:EncryptionGeneral.png | border]]
[[File:EncrypMod General.png | border]]


Note: the file name is automatically generated and compliant to the ACD file naming convention.
Note: the file name is automatically generated and compliant to the ACD file naming convention.

Revision as of 10:51, 21 March 2017

Home page Return homepage
Français Accéder à la partie française

Introduction

The Luxembourg Tax Authoritiy (Administration des contributions directes (ACD)) published on 19 January 2017 an updated version of the circular ECHA3 defining the new format that takes into account the Internal Revenue Services (IRS) FATCA XSD 2.0. Luxembourg Financial Institutions will have to use this new schema, as it will be the only one accepted as from now.


Manual filing through e-file v2

Environment

  • Select your environment:

Production environment : https://www.e-file.lu/e-file/

Homologation environment (Test) : https://homologation.e-file.lu/e-file/


Login

  • Enter your e-file login credentials (user name and password) and click the Access button.

Identification.jpg

IMPORTANT: If you do not have an e-file user account or if you do not remember your password, you might contact your e-file administrator of your company.


Access FATCA form

  • Click on the Report Generation icon:

Fatca ReportGen.jpg


  • Select Formulaire FATCA

Select Form Fatca.jpg


Result: the FATCA form opens

Open form.jpg


Complete FATCA form

Contact tab

This is the Luxembourgish part of the FATCA report added by ACD.

Contact tab.jpg


AEOI reference

AEOI REF.jpg

  • AEOI reference: free text to be provided by the Depositor.
  • Specifications of the free text: maximum length 100 characters, only capital characters, number 0-9, must be unique, etc.; Cf. details ECHA3, page 13.
  • Our FATCA form respects all these specifications by default. Please note that the XSD of the ACD does not check these specifications on our Sending Service and your reporting might be rejected by the ACD.


Information on Depositor

Info Dep.jpg

  • Depositor name (pre-filled): The Depositor is an entity (legal or natural person) that is in charge of filing the FATCA reporting to the ACD (e.g. Service provider).
  • Personal Identification Number (pre-filled): The Depositor needs a Personal Identification Number (Luxembourgish Matricule Number also known as CCSS code) to be able to file the report.

If the Depositor does not have a Luxembourgish Matricule Number, he has to contact the Bureau de la retenue d'impôt sur les intérêts

-by mail: aeoi@co.etat.lu

-by phone: Phone book_Bureau de la retenue d'impôt sur les intérêts


IMPORTANT: all pre-filled data have to be communicated to Fundsquare in order to be available in the FACTA form.


Reporting person

The Reporting Person is the Reporting Financial Institution (RFI). This element is used by the ACD for tracking purposes (i.e. in case of Zero Reporting).

It is the same entity as in the "Reporting FI" tab.

RepPERSON.jpg

  • Name of the reporting financial institute: Select the entity in the drop-down list for which the reporting is done.
  • Reporting person (pre-filled once the RFI has been selected)
  • Identification number (pre-filled with the Luxembourgish Matricule Number once the RFI has been selected)
  • Entity Identification number extension (pre-filled with the value "M00000000"): "M00000000" is the default value if you have no extention code to communicate.

IMPORTANT: If a sub-entity has to file a FATCA reporting and does not have a Luxembourgish Matricule Number, it must enter the parent Luxembourgish Matricule Number in the first field and an additional identifier in the second field. For example, sub-funds have to enter the Luxembourgish Matricule Number of the umbrella fund in the Identification Number field and enter the sub-fund number in the Entity Identification number extension field. If the RFI has no Luxembourgish Matricule Number the instructions published on the ACD website have to be followed (Cf.: Contact_Division échange de renseignements et retenue d’impôt sur les intérêts).


IMPORTANT: all selectable and pre-filled data have to be communicated to Fundsquare in order to be available in the FACTA form.


Information on declarer

The declarer is a Financial Institution that is repsonsible for the reporting. The Declarer can be either the FI subject to the reporting obligation or an entity such as the management company or a trustee handling the reports for the FI. The Luxembourg tax authority needs the contact details of a reachable person from the Back Office who has detailed knowledge regarding the content of the report. Please note, questions regarding the format of the report should be dealt with by the Depositor.

Declarer.jpg


Export - import files - save work in progress

Export.jpg

1. Click this button to export the final report in XML format. The file will be saved on your harddrive and is available for sending to the Regulator. This button will only be available if the green Icon GreenIcon.png appears in every section of the completed report.

2. This button allows you to upload an existing XML report from your network or harddrive into the report generator.

3. Work in progress on a report has to be saved with this button. The exported .xml file will be called DRAFT_filename.xml and cannot be uploaded for filing. It can be imported onto the tool for later use. Only final reports will carry the correct naming convention for submission to the regulator.

4.If green ticks GreenIcon.png appear in every section of the completed report, the Transmission button will become available.


File transmission

Setup of the e-file v2 encryption module v2

1. If green ticks GreenIcon.png appear in every section (Contact, Header, Reporting FI and Reporting group) of the completed report, click the Transmission.png button

Result: the EfileCrypto.jnlp file is generated.

IMPORTANT: This file has to be downloaded (if you use the application for the first time) locally on your computer and must be opened to launch the Encryption Module.

Note: the Encryption Module is a Java application. For security reasons, this module aims at encrypting documents before they are sent to authorithies. It is also used to decrypt documents and feedbacks.

Java version 1.7.55 is a prerequisite for the installation of the e-file v2 encryption module.


2. Click the Open button of the EfileCrypto.jnlp file Jplg.jpg

Result: the window below opens

JavaEfileWindow.png


3. Click the RunButton.png button 

Result: the Encryption Module is launched

EncryptionConfig.png

Important: It is possible that the pop-up blocker does not allow .jnlp files to be downloaded. Please ask your IT deparment to allow pop-ups from https://www.e-file.lu/ .


4. The encryption module has to be configured when it is used for the first time (or after each Java update).

The path to the keystore has to be selected with the BrowseButton.png button and the key (locally or on a server) will have to be imported with the ImportButton.png button :

EncryptionConfig.png

Once the key has been imported, the access to the keystore is memorized by the application and does not have to be reconfigured in the future.

In order to be more user friendly and to speed up the sending process, the encryption module will then run as a back ground process on your desktop. If you need to end the process, right click on the icon in the taskbar and select “Close encryption module” :

EncryptionTaskbar.png


5. Click the Transmission.png button in the Report Generator screen. 

Result: as the installation and configuration of the encryption module are done, the General Tab of the Encryption Module will open directly.

EncrypMod General.png

Note: the file name is automatically generated and compliant to the ACD file naming convention.


6. Enter a "title of file sent" (this name can later be used for search queries) and the keystore password. The SendButton.png button is now available and the report can be sent. A pop-up window will confirm the transmission.


Naming convention

Report :
FATCA_DateTime_Channel_MatriculeReporter_GIIN_ProdTest.xml

Feedback from ACD :
FATCA_ DateTime_Channel_MatriculeReporter_GIIN_ProdTest_Status.xml

Code Definition Structure Values
DateTime Creation date and time Number(14) AAAAMMJJhhmmss
Channel Communication channel Char(1) B (Bourse)
MatriculeReporter Social Security Identification Number Number(11) - Number(13) Code CCSS
GIIN GIIN (Global Intermediary Identification Number ) of the declarer Char(6).Char(5).Char(2).Number(3) Code GIIN XXXXXX.XXXXX.XX.XXX
ProdTest Environment type Char(1) P = Production

T = Test

Status Response status Char(3) Technical Feedback

ACK = File technically received by ACD
NAK = Error encountered during the file reception
Business Feedback
VAL = Validated and imported by ACD
WAR = Validated and imported by ACD but with small issues that raised a warning
ERR = Error in file, rejected by ACD

Examples

Report :
FATCA_20150731115912_B_11231231230_LBITA8.00002.SP.442_T.xml

FATCA report created the 31/07/2015 via Bourse’s channel, with CCSS code 11231231230 GIIIN code LBITA8.00002.SP.442, in the test environment.

Feedback from ACD :
FATCA_20150731115912_B_11231231230_LBITA8.00002.SP.442_T_ack.xml
FATCA report created the 31/07/2015 via Bourse’s channel, with CCSS code 11231231230 GIIIN code LBITA8.00002.SP.442, in the test environment and has been received by ACD.



Automatic Sending with the Sending Service

In order to send reports with the Sending Service, the following components have to be installed on your desktop:

  • Java version 1.6.0.14 or higher
  • Sending service version 3.3.6 or higher

Access to the Sending Service

The Sending Service is accessible with the file explorer and visible as a folder including subfolders :

Error creating thumbnail: Image type not supported

The standard file structure includes a «FATCA» subfolder (by default, a subfolder for each type of reporting is included).

Sending frequency

During the setup of the sending service, the sending frequency can be individually set for each subfolder by your e-file administrator within the setup file. The default sending frequency is every 30 minutes but it can be tailored according to your needs.

Report transmission

In order to send a report with the Sending Service, the exported .xml report has to be copied into the …/ServiceDeposant/ReportingDiffusion/FATCA subfolder.

Files created by the Sending Service

During and at the end of the sending, the Sending Service generates various files in the subfolder that has been used for the sending. Three type of files are generated:

  • .trt file : indicates the start of the transmission

In order to be able to send the original file, the Sending Service transforms the latter into a .trt file and adds a timestamp. Eg «OriginalName.xml» is transformed into OriginalName.xml.timestamp.trt:

FATCA_20150731115912_B_11231231230_LBITA8.00002.SP.442_T.xml becomes
FATCA_20150731115912_B_11231231230_LBITA8.00002.SP.442_T.xml_20150731122616366.trt

  • .acq file : the transmission has been successfully completed

Example of a successful transmission :
Before the transmission :

FatcaFileXml.png

After the transmission:
FatcaFileAcq.png

  • .err file : indicates that an error has occurred during the sending

The error file contains technical messages designed to help find the root cause of the error, eg naming errors.


Transmission follow up

Get the feedbacks

Manual access

First connect on https://www.e-file.lu/e-file with your credentials.
Select the "Document management" module as follow :

IconModules.png


Select "Transmission follow up" tab :

TransmissionFU.png

The search can be defined between 2 dates and will display all the reports sent during that period.
Each report has a status to have a quick overview of your sendings.

  • "Transmitted" means that the report is currently dispatched to the ACD.
  • "Feedback Received" means that at least one feedback has been received. It also means that the ACD was able to read your report.
  • "To validate" means that the report needs to be validated by the declarant on E-file V2. This is a really specific case.


ResultSearch.png

To see the reports and its feedback, click on the blue icon on the right.

ListFiles.png

The files are displayed with a type:

  • FATCA = Original report
  • FDBTEC = Technical feedback
  • FDBBUS = Business feedback


To read one of these files, click on the green icon on the right.
As the document is encrypted it will launch our encryption module V2.

ModuleDL2.png
Finally the keystore password is requested to either save the file or directly open it.

Access from Sending Service

ACD's feedbacks can be found in the sub-folder "Replies" from the following path .../ServiceDeposant/ReportindDiffusion/FATCA/Replies/.
Each feedback has a specifical status (see #Naming_convention : Status) which can be seen in the file name (ex : ack).

FeedbackSendingService.png

The "Replies" folder is created upon feedback receipt. Please check the Sending Service's configuration whether it cannot be found. In the configuration file, the variable corresponding to "Configuration of connection for feedback" and the the one corresponding to "Configuration of connection for authority acknowledgement" should be set to "up".

FATCA FAQ

How to modify an existing report ?

In order to modify an existing report the Report Generator's form has to be completed with the new information. The type of modification to apply is set up in the "Reporting FI" section in "Document Specification" and in "Reporting Group" section in "Account Report" when clicking AddAccount.png.
The different types are the following :

  • FATCA1 : Initial sending. The file contains only new information
  • FATCA2 : Asked modifications. The file contains only corrections asked by american's authorities (IRS)
  • FATCA3 : Cancellations. The file contains only cancellations concerning previously changed information
  • FATCA4 : Modifications. The file contains only corrections concerning the previously changed information on declarer's initiative

To chose the report to modify, its reference has to be entered in the document reference ID to correct and message reference ID to correct.
RefDoc.png

Why the GIINs do not appear on the form ?

To register your GIINs the contact form of our Client Service has to be fill up.
After the registration of your GIINs you will receive a confirmation mail within few days, if you haven't received the email yet please contact fatca_onboarding@fundsquare.net.

Error message : The process takes too much time. Please restart the encryption module.

ErrorTransmission.png
The error message occurs when the encryption module is not started in time.
Please check that the pop-up are enable for the site https://www.e-file.lu.
When clicking the "Transmission" button the file EfileCrypto.jnlp should be downloaded in order to launch the encryption module. You have to open this file with Java Web Start Launcher to run the module.

Message : Waiting files to transmit...

WaitingFile.png

This error might occur when there is a connection problem between your proxy and the encryption module V2.

Close the encryption module :
EncryptionTaskbar.png

Open the Java console (See http://www.e-file.lu/wiki/index.php/Encryption_Module#Show_the_console_in_case_of_other_Java_issue) and check the logs.
If an error 407 appears, it means that the encryption module is not able to authenticate on your proxy.
As a consequence all communications with E-file are blocked.

In that case the solutions to resolve this problem are the following :

  • Add the group "NoAuthenticated exception group" to your proxy for www.e-file.lu
  • By-pass the proxy for the communication with www.e-file.lu

For more information please call the Helpdesk.